SPRING

Spring versions of our probes naturally Extend, pushing the probes constantly to the surface.  These are designed for manual Gauging etc
  • D3P SPRING

    Quite possibly the world’s thinnest probe, the tiny 3 mm diameter allows for even tighter packing densities for measuring features on intricate parts.

    Keep Reading
  • D6P SPRING

    With the D6P probes, a 25% diameter reduction over conventional probes has been achieved, yet performance and life expectancy has been maintained. Long life precision bearings ensure that probes maintain their performance for millions of cycles

    Keep Reading
  • D6T 6mm DIAMETER LOW TIP FORCE SPRING

    Feather Touch transducers have been designed especially to gauge or measure delicate surfaces such as car windscreens, pharmaceutical bottles, electro-mechanical components and plastic parts. Where as a traditional transducer exerts a tip force of approximately 0.7 N, the Feather Touch exerts a mere 0.18 N when used in the horizontal position. This reduction is achieved by replacing the gaiter with a close tolerance gland.

    Keep Reading
  • DK SPRING BLOCK GAUGE

    Solartron’s Block Gauges makes precision measurements of bores and cavities a simple and reliable process. More generally, the use of these devices is recommended in applications where space and access is limited and where the use of axial probes is not possible. The 2 mm Block Gauge is only 8 mm wide. The Block Gauges offer unrivalled ruggedness, accuracy and repeatability. All three units are extremely versatile and provide datum surfaces and all the adjustments required for precision gauging applications. Block Gauges have robust precision linear bearings with minimal clearance, which limits unmeasured movements maintaining good repeatability even when the contact tip is mounted off centre.

    Keep Reading
  • DP SPRING

    The DP range of spring push probes is the workhorse of the gauging industry. Very high resolution excellent linearity and high data speeds is coupled with outstanding measurement repeatability, Long life bearings and IP65 sealing ensures that the probes maintain their performance for millions of measurements.

    Keep Reading
  • DT FEATHERTOUCH SPRING

    Feather Touch transducers have been designed especially to gauge or measure delicate surfaces such as car windscreens, pharmaceutical bottles, electro-mechanical components and plastic parts. Where as a traditional transducer exerts a tip force of approximately 0.7 N, the Feather Touch exerts a mere 0.18 N when used in the horizontal position. This reduction is achieved by replacing the gaiter with a close tolerance gland. Despite the low volume of air flow the bearing is constantly purged, avoiding the build up of dust.

    Keep Reading
  • DU PARALLEL SPRING FLEXURE GAUGE

    Parallel Flexures with high resolution and excellent repeatability make Solartron’s Flexure Transducers the frst choice for high speed precision gauging. With no sliding moving parts, the flexure will maintain performance for millions of cycles and are virtually free from hysteresis. Flexures can be mounted such that there is little or no stress through the gauge line enablingprecision profling of moving materials such as rotating shafts, brake discs etc. With resolution better than 0.05 µm at speeds up to 3906 readings per second, the flexure with Orbit® provides an excellent dynamic solution

    Keep Reading
  • DW ULTRA LOW TIP FORCE SPRING

    The Ultra Feather Touch probe has so light a tip force, it is a viable alternative to a non-contact sensor in many applications.

    Keep Reading
  • DZ ULTRA SHORT SPRING

    The DZ range of probes are probably the shortest available on the market with a full calibrated measuring range of 1 mm or 2 mm. The unique bearing design creates a very short probe body while still maintaining the performance of a standard probe.

    Keep Reading